The perfect partner for those looking to step into the world of CO2 laser cutting. The FabCore is designed for those starting into laser cutting as well as those looking for a capable machine where space or budget is tight.
Many laser cutters are complex, dangerous, or so expensive you would never let a student interact with them. The FabCore challenges this status quo by providing a machine to educational settings which is not only safe for all users in every environment but also simple and affordable to maintain. The FabCore makes laser cutting accessible for all. The most affordable CE Class 1 laser cutter on the market. You will not find a safer similar machine for less!
Product Features
Clean cuts with detailed engraves thanks to a High Quality 40W laser and optimal air delivery
Professional machine, expandable with larger compressors and active cooling for heavy frequent usage
Easy to use, by anyone
Plug & Play, Just add power!
Easy manual focus
Clean extraction, raised bed makes for optimal air flow
Professional software from LightBurn
Easy and safe access of all maintenance areas
CE & Consumer Class 1 laser product
Customer Quotes
"Working with the FabCore is actually not that difficult for primary school children. In one go they learn from each other how to make a key ring."~ Junior IOT
"It is a solid, no frills, state of the art machine. Workhorse." ~mini FABLAB
A CO2 lasers wave length is 10.6μm a spot size varies depending on focal lens and quality of the laser tube and is typically around 100-300μm
True speed values achievable for normal operations without degradation of quality. Other vendors will advertise theatrical speeds achievable only if the job allows for constant acceleration in a single vector or introduce significant wobble to your vectors.
Dimensions may vary depending on the material due to kerf, however LightBurn can compensate with offsets
True Dpi is limitation of the spot size. For a CO2 laser the true max dpi will be around 300dpi for any system. However often you will see higher Dpi's. This creates overlapping spots and allows for more exposure of the material increasing detail for some materials. The software allows for DPIs of your choosing.
