Made For Hackers

#FabKit Mk6

FabKit Mk 6

Bigger, Faster, & More powerful. The worlds first professional CO2 laser kit just got a tune up!

All in for 6,000 Euros   exVAT

Fab40W or Fab75w CO2 Laser

A superior beam quality allows the FabCore to cut thicker, faster and cleaner than comparable power lasers!

Integrated controls

The FabKit comes with a control interface allowing you to save files, load files and adjust speed and power.

Large Cutting Area & Motorised bed

A spacious work area of 800x500x130mm provides you plenty of room to cut and engrave, the motorised z-axis allows for auto focus.

Safety & Security  

Equipped with all the essential safety features to ensure your safety. The FabKit is designed to be Class 1 Laser product

Compact Design

Even with its relatively huge cutting area the FabKit remains a compact machine with outer dimensions of 1266*816*503mm (W*D*H)

2 Year Warranty 

The FabKit comes with a 2 year component warranty as standard.*

FabKit Included as standard

FabKit Expansions & Upgrades

Fabkit Specifications 

  • Stepper Servos

    High speed and torque stepper motors with integrated encoder and motor driver.

  • Open Source Hardware

    Sadly has the smoothieboard is out of production we have opted to supply the FabKit with Lightburn and compatible controller, sadly this is not open source. The rest of the machine remains easily hackable :D

  • Interchangeable Lenses

    The FabKit provides the option to switch between a variation of focal lengths and offset distances to ensure perfect results.

  • Easy To Use

    The FabKit is designed to be used by all.

    With a simple control pannel you can jog, load files and cut all from the machine its self.


  • Industrial Quality

    All metal design, high quaility linear rails and 9mm Steel core HTD belt the FabKit is designed to last.

  • LED Lighting

    Being able to see what going on inside your machine might seem like an obvious feature, however to our surprise LED lighting is not a common feature for CO2 lasers.

  • Standard Operating Procedures

     A clear and concise check list is built in to the FabKit, nicely reminding you to double check the important aspects of operating a CO2 laser

  • Sturdy Door

    An 8mm thick clear PC cover makes for a robust door, combined with a gas strut you don't have to worry about the door closing on your head!

  • Optimal Air Flow

    Removing the smoke generated from laser cutting is really important. The FabKit is designed to have fast flowing air under the cutting grid which will quickly sweep away any smoke generated from the cutting process.

  • Easy to change laser tubes

    CO2 lasers are consumable eventually the laser will need changing. This is often a scary job for many users. With the FabKit we have designed the tube to be as closed to plug and play as possible. Simply unscrew the power and water connection and slide out the old tube. The new tube comes with a new pre-aligned visible laser which can be used to easily align the mirrors.

  • Auto Focus

    The FabKit has an auto focus sensor, simply load your material, jog the laser head over and click set focus. The machine will then set the perfect focal point.


  • Expandable

    Although not currently available the FabKit has provisions a 4th axis rotary (Using the Y axis)


  • Quiet High Flow Compressor

    The FabKit uses an ultra quiet constant flow compressor to provide high volume constant air flow to help with the cutting process and keep the optics clean. The compressor is also enabled/disabled with the cutting jobs to future help with noise reduction.

  • Class 1 Laser

    Through means of design a correctly assembled FabKit encapsulates its 40W CO2 laser preventing the exposure of dangerous laser radiation. This means it can be operated without the need of additional safety equipment. 

  • Integrated alignment laser

    The FabKit integrates a visible red laser with the invisible 40W CO2 laser. This provides a visible path for the CO2 laser, making it easier to align the CO2 laser with your work piece. 

  • Emergency Stop

    A mechanical E-Stop break power to the machine ensuring should something go wrong you always have a clear and straightforward way to shut down the machine.

  • Tri Colour Status Indicator

    The tri colour led continuously informs you of the laser's current status,

    Red; The laser cannot operate because the door is open or the chiller is off.

    Green; The laser is ready to operate. The door is closed and chiller is running.

    Orange; The laser is currently firing. This will flicker on and off as and when the laser fires. 


  • Dual Interlocks

    To ensure the laser cannot fire with the door open it is important to monitor the state of the door: open or closed. Like all FabCreator machines the Fabkit use two sensors to check the door is closed.

  • Key Switch

    While not a requirement for a Class 2 lasers we like to incorporate key switches into FabCreator machines in order to provide an extra level of control over the machine. 

    Laser cutters are tools not toys, improper use can lead to fire, disabling and removing the key allows everything apart from the laser to work. A great feature for community spaces and schools who might not want unauthorised use of the machine.


  • Chiller Interlock

    DC CO2 lasers need to be cooled, running a laser without cooling will damage the laser, reducing its lifespan. To ensure the laser cannot be run without the chiller the chiller is incorporated into the safety interlock system.

FabKit FAQ

  • Class 1 Laser*?

    The FabKit comes with two lasers the 40W or 75W CO2 laser we use for cutting and engraving and a <0.4mW visible laser which is aligned with the invisible CO2 laser at the source, This means we have a very close visible representation of where the invisible laser will hit.

  • Why the * after Class 1 Laser?

    As a DIY kit you the owner must assemble the FabKit. Therefore, we are not able to guarantee you have assembled the FabKit correctly and thus it might not be a Class 1 laser.

    Not comfortable building your own laser? We recommend the FabCore.


  • What does the warranty cover?

    The 2 year warrenty cover everything apart from consumables.

    Consumables include mirrors, lenses and the laser tube.


    The Fab40W  has a 12 months warranty with the active chiller.


    Warranty does not cover shipping cost.

  • Do I need to pay tax? (VAT)

    Vat registered businesses located within the EU but outside the Netherlands are not required to pay us Dutch VAT.



    Customers located in the EFTA counties are not required to pay us  Dutch VAT, however you will have to pay the applicable import duties in addition to your nations vat rate. 



    Dutch registered business and non vat registered customers located within the EU are required to pay the Dutch rate of 21% VAT.



    If you have any questions feel free to contact us at Sales@fabcreator.com

  • Where do you ship?

    We ship our products throughout Europe EEA and EFTA. 


    The costs vary but the closer to the Netherlands the cheaper it is.


    If you are located outside these economic zones but want a FabCreator Laser contact us at: sales@fabcreator.com

  • Software Subscription

    The FabKit can be used with the opensource laserweb software. 

    The FabKit will also work with, but does not come standard with a LightBurn subscription.


  • Made to Order

    As a manufacturer we make our machine to order.

    This means it is not possible to refund or return your FabCreator laser.

Have a Question? Just ask