A superior beam quality allows the FabCore Plus to cut thicker, faster and cleaner than comparable power lasers!
The FabCore Plus comes with a control interface allowing you to save files, load files and adjust speed and power.
A spacious work area of 800x500x130mm provides you with plenty of room to cut and engrave, the motorised z-axis allows for auto focus.
Equipped with all the essential safety features to ensure your safety. The FabCore Plus is designed to be Class 1 Laser product.
Even with its relatively huge cutting area the FabCore Plus remains a compact machine with outer dimensions of 1266*816*503mm (W*D*H)
The FabCore Plus comes with a 2 year component warranty as standard.*
High speed and torque stepper motors with integrated encoder and motor driver.
The FabCore Plus provides the option to switch between a variation of focal lengths and offset distances to ensure perfect results.
The FabCore Plus is designed to be used by all.
With a simple control pannel you can jog, load files and cut all from the machine its self.
All metal design, high quaility linear rails and 9mm Steel core HTD belt the FabCore Plus is designed to last.
Being able to see what going on inside your machine might seem like an obvious feature, however to our surprise LED lighting is not a common feature for CO2 lasers.
The FabCore Plus arrives ready to go, just connect it up and get cutting!
A clear and concise check list is built in to the FabCore Plus, nicely reminding you to double check the important aspects of operating a CO2 laser
An 8mm thick clear PC cover makes for a robust door, combined with a gas strut you don't have to worry about the door closing on your head!
Removing the smoke generated from laser cutting is really important. The FabCore Plus is designed to have fast flowing air under the cutting grid which will quickly sweep away any smoke generated from the cutting process.
CO2 lasers are consumable eventually the laser will need changing. This is often a scary job for many users. With the FabCore Plus we have designed the tube to be as closed to plug and play as possible. Simply unscrew the power and water connection and slide out the old tube. The new tube comes with a new pre-aligned visible laser which can be used to easily align the mirrors.
The FabCore Plus has an auto focus sensor, simply load your material, jog the laser head over and click set focus. The machine will then set the perfect focal point.
Although not currently available the FabCore Plus has provisions a 4th axis rotary (Using the Y axis)
The FabCore Plus uses an ultra quiet constant flow compressor to provide high volume constant air flow to help with the cutting process and keep the optics clean. The compressor is also enabled/disabled with the cutting jobs to future help with noise reduction.
The FabCore Plus is a Class 1 laser product.
The FabCore Plus integrates a visible red laser with the invisible 75W CO2 laser. This provides a visible path for the CO2 laser, making it easier to align the CO2 laser with your work piece.
A mechanical E-Stop break power to the machine ensuring should something go wrong you always have a clear and straightforward way to shut down the machine.
The tri colour led continuously informs you of the laser's current status,
Red; The laser cannot operate because the door is open or the chiller is off.
Green; The laser is ready to operate. The door is closed and chiller is running.
Orange; The laser is currently firing. This will flicker on and off as and when the laser fires.
To ensure the laser cannot fire with the door open it is important to monitor the state of the door: open or closed. Like all FabCreator machines the FabCore Plus use two sensors to check the door is closed.
While not a requirement for a Class 1 lasers we like to incorporate key switches into FabCreator machines in order to provide an extra level of control over the machine.
Laser cutters are tools not toys, improper use can lead to fire, disabling and removing the key allows everything apart from the laser to work. A great feature for community spaces and schools who might not want unauthorised use of the machine.
DC CO2 lasers need to be cooled, running a laser without cooling will damage the laser, reducing its lifespan. To ensure the laser cannot be run without the chiller the chiller is incorporated into the safety interlock system.
The FabCore Plus comes with two lasers the 75W CO2 laser we use for cutting and engraving and a <0.4mW visible laser which is aligned with the invisible CO2 laser at the source, This means we have a very close visible representation of where the invisible laser will hit.
The 2 year warranty covers everything apart from consumables.
Consumables include mirrors, lenses and the laser tube.
The Fab40W has a 6 month warranty with the passive chiller or 12 months warranty with the active chiller.
Warranty does not cover shipping cost.
Vat registered businesses located within the EU but outside the Netherlands are not required to pay us Dutch VAT.
Customers located in the EFTA counties are not required to pay us Dutch VAT, however you will have to pay the applicable import duties in addition to your nation's vat rate.
Dutch registered business and non vat registered customers located within the EU are required to pay the Dutch rate of 21% VAT.
If you have any questions feel free to contact us at Sales@fabcreator.com
We ship our products throughout Europe EEA and EFTA.
The costs vary but the closer to the Netherlands the cheaper it is.
If you are located outside these economic zones but want a FabCreator Laser contact us at: sales@fabcreator.com
The FabCore comes with a licence to LightBurn.
The licence lasts for 365 days, after which it will continue to work but you will no longer receive updates. A renewal is around 30 euros
As a manufacturer we make our machine to order.
This means it is not possible to refund or return your FabCreator laser.